The Delta RC-51 planer is quipped with a 7-1/2 HP motor 230/460 volt three phase. Has a working capacity of 20″ wide x 9″ thick with a minimum thickness capacity of 1/8″ and a feed rate of 25 and 46 FPM.
Don't see your desired class on the schedule?
Ask us to schedule a class.
We can also do private sessions!
Use this calendar to register for a class.
- Maximum width 20″ (510mm)
- Maximum thickness 9″ (229mm)
- Minimum thickness 1/8″ (3.175mm)
- Maximum depth of cut at 20″ 5/16″ (7.937mm)
- Minimum length 11″ (280mm)
- Feed rate 25/46 ft/min
- Cutterhead diameter 4.72″ (120mm)
- Cutterhead speed 5,000rpm
- Cuts per minute 20,000
- Table 20 x 32-3/4″ (510 x 825mm)
- Motor 7-1/2hp 220v 3ph